The Bureau of India Standards (BIS) on May 15, 2023, notified the date of establishment and withdrawal of Methods of Test for Rubber, Vulcanized, or Thermoplastic.
The following Indian Standards were established on May 12, 2023:
• IS 3400 (Part 2/Sec 6) : 2023/ISO 48-6 : 2018 Methods of Test for Rubber, Vulcanized or Thermoplastic Part 2 Determination of Hardness Section 6 Apparent Hardness of Rubbe-Covered Rollers by IRHD Method
• IS 7016 (Part 7) : 2023/ISO 1420 : 2016 Methods of Test for Rubber or Plastics Coated Fabrics Part 7 Determination of Resistance to Penetration by Water (Third Revision)
• IS 7840 : 2023/ISO 6414 : 2020 Technical Product Documentation (TPD) — Technical Drawings for Glassware (Second Revision)
• IS 8000 (Part 3) : 2023/ISO 1660 : 2017 Geometrical Product Specifications (GPS) — Geometrical Tolerancing Part 3 Profile Tolerancing (Third Revision)
• IS 8383 : 2023/ISO 2942 : 2018 Hydraulic Fluid Power — Filter Elements — Verification of Fabrication Integrity and Determination of the First Bubble Point (Third Revision)
• IS 9269 : 2023/ISO 3968 : 2017 Hydraulic Fluid Power — Filters — Evaluation of Differential Pressure Versus Flow (Third Revision)
• IS 10069 : 2023/ISO 4409 : 2019 Hydraulic Fluid Power — PositiveDisplacement Pumps, Motors and Integral Transmissions — Methods of Testing and Presenting Basic Steady State Performance (Third Revision)
• IS 10585 : 2023/ISO 10100 : 2020 Hydraulic Fluid Power — Cylinders — Acceptance Tests (Third Revision)
• IS 10714 (Part1) : 2023/ISO 128-1 : 2020 Technical Product Documentation (TPD) — General Principles of Representation Part 1 Introduction and Fundamental Requirements (First Revision)
• IS 10714 (Part 2) : 2023/ISO 128-2 : 2022 Technical Product Documentation (TPD) — General Principles of Representation Part 2 Basic Conventions for Lines
• IS 10714 (Part 3) : 2023/ISO 128-3 : 2022 Technical Product Documentation (TPD) — General Principles of Representation Part 3 Views, Sections and Cuts
• IS 10715 (Part 3) : 2023/ISO 6410-3 : 2021 Technical Drawings — Screw Threads and Threaded Parts Part 3 Simplified Representation (First Revision)
• IS 10721 : 2023/ISO 5459 : 2011 Geometrical Product Specifications (GPS) — Geometrical Tolerancing — Datums and Datum Systems (First Revision)
• IS 10899 : 2023 Fortified Maida — Specification (First Revision)
• IS 10990 (Part 1) : 2023/ISO 6412-1 : 2017 Technical Product Documentation — Simplified Representation of Pipelines Part 1 General Rules and Orthogonal Representation (Second Revision)
• IS 10990 (Part 2) : 2023/ISO 6412-2 : 2017 Technical Product Documentation — Simplified Representation of Pipelines Part 2 Isometric Projection (Second Revision)
• IS 11158 : 2023/ISO 7083 : 2021 Technical Product Documentation — Sysmbols Used in Technical Product Documentation — Proportions and Dimensions (First Revision)
• IS 12540 : 2023 Acrylonitrile — Specification (First Revision)
• IS 13289 : 2023 Polypropylene/Impact Copolymer (PPCP) Crates for Milk Pouches — Specification (First Revision)
• IS 13534 : 2023/ISO 4411 : 2019 Hydraulic Fluid Power — Valves — Determination of Pressure Differential/Flow Characteristics (Second Revision)
• IS 13542 : 2023/ISO 4406 : 2021 Hydraulic Fluid Power — Fluids — Method for Coding the Level of Contamination by Solid Particles (Third Revision)
• IS 15504 : 2023/ISO 7001 : 2023 Graphic Symbols — Registered Public Information Symbols (Second Revision)
• IS 16595 (Part 210) : 2023/ISO 9241- 210 : 2019 Ergonomics of Human System Interaction Part 210 Human-Centered Design for Interactive Systems
The following Indian Standards will be withdrawn on June 12, 2023:
• IS 7016 (Part 7) : 2009/ISO 1420 : 2001 Methods of Test for Coated and Treated Fabrics Part 7 Rubber-or PlasticsCoated Fabrics — Determination of Resistance to Penetration by Water (Second Revision)
• IS 7840 : 1983/ISO 6414 : 1982 Technical Drawings for Glassware (First Revision)
• IS 8000 (Part 3) : 1992/ISO 1660 : 1987 Technical Drawings — Geometrical Tolerancing Part 3 Dimensioning and Tolerancing of Profiles (Second Revision)
• IS 8383 : 2017/ISO 2942 : 2004 Hydraulic Fluid Power — Filter Elements — Verification of Fabrication Integrity and Determination of the First Bubble Point (Second Revision)
• IS 9269 : 2019/ISO 3968 : 2001 Hydraulic Fluid Power — Filters — Evaluation of Differential Pressure Versus Flow Characteristics (Second Revision)
• IS 10069 : 2017/ISO 4409 : 2007 Hydraulic Fluid Power — Positive-Displacement Pumps, Motors and Integral Transmissions — Methods of Testing and Presenting Basic Steady State Performance (Second Revision)
• IS 10585 : 2019/ISO 10100 : 2001 Hydraulic Fluid Power — Cylinders — Acceptance Tests (Second Revision)
• IS 10714 (Part1) : 2006/ISO 128-1 : 2003 Technical Drawings — General Principles of Representation Part 1 Introduction and Index
• IS 10715 (Part 3) : 1999/ISO 6410-3 : 1993 Technical Drawings — Screw Threads and Threaded Parts Part 3 Simplified Representation
• IS 10721 : 1983/ISO 5459 : 1981 Datums and Datum Systems for Geometrical Tolerancing on Technical Drawing
• IS 10899 : 1984 Specification for FortifiedWheat Maida
• IS 10990 (Part 1) : 1991/ISO 6412-1 : 1989 Technical Drawings — Simplified Representation of Pipelines Part 1 General Rules and Orthogonal Representation (First Revision)
• IS 10990 (Part 2) : 1992/ISO 6412-2 : 1989 Technical Drawings — Simplified Representation of Pipelines Part 2 Isometric Projection (First Revision)
• IS 11158 : 1984/ISO 7083 : 1983 Proportions and Dimensions of Symbols for Geometrical Tolerancing used in Technical Drawings
• IS 12540 : 1988 Specification for Acrylonitrile
• IS 13289 : 1993 Polypropylene/Impact Copolymer (PPCP) Crates for Milk Satchets — Specification
• IS 13534 : 2013/ISO 4411 : 2008 Hydraulic Fluid Power — Valves — Determination of Pressure Differential/Flow Characteristics (First Revision)
• IS 13542 : 2020/ISO 4406 : 2017 Hydraulic Fluid Power — Fluids — Method for Coding the Level of Contamination by Solid Particles (Second Revision)
• IS 15504 : 2018/ISO 7001 : 2007 Graphic Symbols —Public Information Symbols (First Revision)
[Notification No. HQ-PUB013/1/2020-PUB-BIS (589)]
