The Bureau of Indian Standards (BIS) on August 08, 2023, issued the date of establishment and withdrawal of the Methods of Test for Petroleum and Its Products.
The following Indian Standards were established on August 02, 2023:
• IS 1448 (Part 102): 2023 Methods of Test for Petroleum and Its Products Part 102 Determination of Air Release Value (First Revision)
• IS 2063 (Part 3): 2023/ISO 230-3: 2020 Test Code for Machine Tools Part 3 Determination of Thermal Effects (First Revision)
• IS 2063 (Part 4): 2023/ISO 230-4: 2022 Test Code for Machine Tools Part 4 Circular Tests for Numerically Controlled Machine Tools (First Revision)
• IS 2582 (Part 3): 2023/ISO 702-3: 2007 Machine Tools — Connecting Dimensions of Spindle Noses and Work Holding Chucks Part 3 Bayonet Type (Third Revision)
• IS 5137: 2023 Rubber Hose for Cement Grouting — Specification (Third Revision)
• IS/ISO 13041-1: 2020 Test Conditions for Numerically Controlled Turning Machines and Turning Centres Part 1 Geometric Tests for Machines with Horizontal Work Holding Spindle(s) (First Revision)
• IS/ISO 13041-2: 2020 Test Conditions for Numerically Controlled Turning Machines and Turning Centres Part 2 Geometric Tests for Machines with a Vertical Work Holding Spindle(s) (First Revision)
• IS 14407: 2023 Aluminium Cans for Beverages — Specification (First Revision)
• IS 15250 (Part 7): 2023/ISO 10791-7: 2020 Test Conditions for Machining Centres Part 7 Accuracy of Finished Test Pieces (First Revision)
The following Indian Standard will be withdrawn on September 02, 2023:
• IS 1448 (Part 102): 1981 Methods of Test for Petroleum and Its Products Part 102 Determination of Air Release Value
• IS 2063 (Part 3): 2016/ISO 230-3: 2007 Test Code for Machine Tools Part 3 Determination of Thermal Effects
• IS 2063 (Part 4): 2016/ISO 230-4: 2005 Test Code for Machine Tools Part 4 Circular Tests for Numerically Controlled Machine Tools
• IS 2582 (Part 3): 1987/ISO 702-3: 1975 Machine Tools — Spindle Noses and Face Plates — Sizes for Interchangeability Part 3 Bayonet Type (Second Revision)
• IS 5137: 1990 Rubber Hose for Cement Grouting — Specification (Second Revision)
• IS/ISO 13041-1: 2004 Test Conditions for Numerically Controlled Turning Machines and Turning Centres Part 1 Geometric Tests for Machines with Horizontal Work holding Spindle
• IS/ISO 13041-2: 2008 Test Conditions for Numerically Controlled Turning Machines and Turning Centres Part 2 Geometric Tests for Machines with a Vertical Workholding Spindle
• IS 14407: 1996 Aluminium Cans for Beverages — Specification
• IS 15250 (Part 7): 2018/ISO 10791-7: 2014 Test Conditions for Machining Centres Part 7 Accuracy of Finished Test Pieces
[Notification No. HQ-PUB013/1/2020-PUB-BIS (659)]
